Manufacturers and suppliers of Flow Boiling Demonstration for engineering labs worldwide.
Flow Boiling Demonstration....
Manufacturers and suppliers of Flow Channel for engineering labs worldwide.
Flow Channel....
Manufacturers and suppliers of Flow Channel, 1m. length for engineering labs worldwide.
Flow Channel, 1m. length....
Manufacturers and suppliers of Flow Control Demonstration Unit for engineering labs worldwide.
Flow Control Demonstration Unit....
Manufacturers and suppliers of Flow Control Demonstration Unit for engineering labs worldwide.
This experimental unit provides a comprehensive experimental introduction to the fundamentals of control engineering using an example of flow control. All components are clearly laid out on a vertical front panel. The large-format process schematic provides an aid to understanding. A pump delivers water from a storage tank into the pipe section. The flow rate is measured by a paddle-wheel sensor. The transparent rotameter enables the control process to be observed very clearly. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is an electric control valve. A ball valve in the pipe section enables defined disturbance variables to be generated. The controlled variable X and the manipulating variable Y can be tapped as analogue signals at lab jacks. This enables external recording equipment, such as a plotter or an oscilloscope, to be connected. An instrumentation and control software with interface module (USB) is available as an accessory. This enables the key process variables to be represented, and control functions executed. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments. - fundamentals of control engineering - latest industrial control engineering components: controllers, transducers, actuators - operation and parameter setting of a multi- functional state-of-the-art digital controller: e.g. parameter setting as P, PI and PID controller - investigation of disturbance and control response - influence of different controller parameters on stability and control quality - investigation of the properties of the open and closed control loops - processing of process variables using external equipment, e.g. plotter or oscilloscope - together with accessory familiarisation with and use of I&C software ....
Manufacturers and suppliers of Flow Control Trainer for engineering labs worldwide.
Flow Control Trainer....
Manufacturers and suppliers of Flow Control Trainer for engineering labs worldwide.
This trainer provides a comprehensive experimental introduction to the fundamentals of control engineering using an example of flow control. A pump delivers water from a storage tank through a piping system. The flow rate is measured by an electromagnetic sensor, which permits further processing of the measured value by outputting a standardised current signal. A rotameter indicates the flow. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is a control valve with electric motor operation. A ball valve in the outlet line enables defined disturbance variables to be generated. The controlled variable X and the manipulating variable Y are plotted directly on an integrated 2-channel line recorder. Alternatively, the variables can be tapped as analogue signals at lab jacks on the switch cabinet. This enables external recording equipment, such as an oscilloscope or a flatbed plotter, to be connected. A process control software is optionally available. The software permits the construction of a complete networked system comprising multiple trainers from the series. The key process variables can also be represented, and control functions executed. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments. fundamentals of control engineering - real industrial control engineering components: controllers, transducers, actuators - operation and parameterisation of the local industrial controller * manually (by keyboard) * using the process control software - investigation of disturbance and control response - controller optimisation - investigation of the properties of the open and closed control loops - processing of process variables using external equipment, e.g. oscilloscope or plotter - together with accessory and other trainers familiarisation with and use of process control software (SCADA) ....
Manufacturers and suppliers of Flow Control Trainer for engineering labs worldwide.
Flow Control Trainer....
Manufacturers and suppliers of Flow in a Pipe Bend for engineering labs worldwide.
When laying pipes it is essential that they are adapted to the circumstances of their environment, which means the pipes will necessarily include deflections in the form of bends. Changing the direction of flow in a pipe changes the pressure conditions. The pressure curve during a change in the flow direction is investigated using the example of a 90° pipe bend. The experimental unit when used in the aerodynamics trainer allows the measurement of the static pressure at 28 pressure measuring points along the pipe bend. The transparent pipe bend has a constant rectangular cross-section with 10 pressure measuring points each on the top and bottom. Four pressure measuring points are located in the region of the curvature on both sides. The pressure measuring points are connected to the tube manometers in via the hoses supplied. The static pressures can be read on the tube manometers. To illustrate the pressure distribution, the static pressure at a measuring point is related to the maximum pressure. The graphical representation of the pressure curve shows a low pressure along the inner radius and an overpressure along the outer radius. Secondary flows occur to compensate for the pressure difference. As a result of friction at boundary layers there are separation vortices at the inner radius. The experimental unit is attached to the air outlet of the trainer, simply and precisely with quick release fasteners. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments. investigation of the pressure curve at a 90° pipe bend - determination of the static pressure at 28 pressure measuring points - representation of the pressure distribution ....
Manufacturers and suppliers of Flow in Pipes and Fittings for engineering labs worldwide.
....
Manufacturers and suppliers of Flow Injection Analysis for engineering labs worldwide.
Flow Injection Analysis
....
Manufacturers and suppliers of Flow Level Control Demonstration Unit for engineering labs worldwide.
Flow Level Control Demonstration Unit....
Manufacturers and suppliers of Flow Measurement By Venturimeter & Orificemeter Apparatus for engineering labs worldwide.
Flow Measurement By Venturimeter & Orificemeter Apparatus....
Manufacturers and suppliers of Flow Measurement Test Set for engineering labs worldwide.
Flow Measurement Test Set....
Manufacturers and suppliers of FLOW MEASURMENT BY ROTAMETER for engineering labs worldwide.
FLOW MEASURMENT BY ROTAMETER....
Manufacturers and suppliers of Flow Meter Demonstration for engineering labs worldwide.
Flow Meter Demonstration....
Manufacturers and suppliers of Flow Meter Demonstration Unit for engineering labs worldwide.
Flow Meter Demonstration Unit
....
Manufacturers and suppliers of Flow Meter Trainer for engineering labs worldwide.
Flow measurement plays a key role in many process engineering systems. Different flow meters are used for this, depending on the medium and application. The trainer is used to examine different principles of operation of flow meters. The flow meters are available as accessories Pressure loss curves and accuracies can be compared to determine which flow meter is suitable for which area of application. One horizontally or vertically installed flow meter can be operated in a closed water circuit. The flow rate can be adjusted via a valve. A high-precision electromagnetic flow rate sensor is available as a reference for calibrating the flow meters. To be able to determine the pressure losses of the various flow meters, the trainer is equipped with two twin tube manometers and a differential pressure sensor. A DC voltage source ensures the power supply to the flow meters if required. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments. together with different flow meters available as accessories - different flow meters and their principles of operation - calibration of different flow meters - position dependency of flow meters - plotting and comparison of pressure loss curves ....
Manufacturers and suppliers of Flow Meters for engineering labs worldwide.
Flow Meters....
Manufacturers and suppliers of Flow Meters Demonstration Unit for engineering labs worldwide.
Flow Meters Demonstration Unit
....
