Electronics Work Bench Basic

Electronics Work Bench Basic

The basic frame work is made of 30 x 30 x 2 mm tubular mild steel
The MS sheet used is over 1.5 mm in thickness for sturdiness
The complete Work Bench is made of M.S. (except the Top) and Powder Coated in two colors for better aesthetic looks
The overall dimensions of Work Bench / Test Bench are: W = 1500 mm ; D = 900 mm ; H = 1500 mm Top : 25 mm thick work top made from laminated wood based plain particle board with one side post forming (round profile). Remaining three sides of the work top is lipped with PVC edge band. Size not less than : 1500 mm x 750 mm and is fitted at a height of not less 750 mm
Three drawer unit – The dimensions of the unit is 400 mm (W) x 450 mm (D) x 600 mm (H)
Top, Sides, bottom & drawer fronts is 18 mm pre-laminated particle board. Drawer sides is made of 12 mm pre-laminated particle board. Drawer bottom and unit back is 9 mm pre-laminated particle board
Leveling screws with base are provided on the legs of the Work Bench
Additional raised back height of 1500 mm with matching height support from the side at a depth = 750 mm divided into two parts with the lower part consisting of the Electrical fittings & the upper part with larger depth having provision to fit the instruments mentioned below: