Compression Testing Machine Four Pillar

Strength of Concrete is a very important aspect during construction. Strength of concrete is obtained by crushing the specimen in from of cubes or cylinders. Engineers carefully design concrete for a particular compressive strength and specimen is tested by applying load in a compression Testing Machine. Where carrying frequently the specimens for testing in a standard laboratory is inconvenient and uneconomical.

With special attachments, the machines can also be used for bricks. Hallow or solid concrete blocks, using appropriate capacity machine.  In general a Compression Testing Machine consists of Load Frame with suitable platens and a Pumping Unit with Pressure gauge, either had operated or electrically cum hand operated. Load frame and Pumping unit are connected by pressure pipes. 

TECHNICAL SPECIFICATION:

Capacity: 200 Tonne       

Maximum Clearance between Platen: 370mm

Maximum Distance between Side Platen: 330mm

Piston Size: 205mm dia

Platen Size: 222mm dia

Piston Stock: 50mm

Specimen Size: 100-150mm Cube

100-150mm dia Cylinder